Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Application of nuclear densometer to compaction compliance test 2

Status
Not open for further replies.

Robert168

Geotechnical
Joined
Mar 3, 2003
Messages
48
Location
CA
Dear Members:

The nuclear densometer is regarded as as a fast and accurate tool to test the density and water content of compacted soils.

For sure it is fast as it takes only 15 seconds to do the measurement. However, is it accurate? If the readings are weird, what might be the cause or causes?

Thanks in advance.
 
This may be a bit late to include this last piece of information, but the charts which compare the accuracey of the readings against time of readings, are included in some of the 'handbooks' you get when you purchase a new gauge, (at least they were in the UK.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top