Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

API PLAN 76

Status
Not open for further replies.
tomato5

tomato5

Mechanical
Joined
Jan 18, 2012
Messages
77
Location
US
ASSUME API PLAN 76 pumps. FOR MOST CASES, WHAT SHOULD BE THE SETTING OF THE P I T IN THE FLUSH LINE?


THANK YOU

Aamir

also could you plese tell me hot to contact the MVPs of our forums
 
Sort by date Sort by votes
This depends on the application. what is the duty? normally set at low pressure to alarm when seal leaks and you can also set a HH trip. Send in the data sheet and you may get a good response
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

LP ENGG
  • Locked
  • Solved
API PLAN
Replies
1
Views
2K
BEMPE16524
BEMPE16524
LP ENGG
  • Locked
  • Question Question
API PLAN
Replies
0
Views
886
LP ENGG
LP ENGG
RogerSAM
  • Locked
  • Question Question
API Plan 72/76 Secondary DGS Failure.
Replies
1
Views
579
SB1976
SB1976
F
  • Locked
  • Question Question
Automatic Top up unit for plan 53b
Replies
3
Views
3K
georgeverghese
georgeverghese
Karam Al Battat
  • Locked
  • Question Question
Seal plan for condensate extraction pump
Replies
1
Views
958
Pandeyji
Pandeyji

Part and Inventory Search

Sponsor

Back
Top