Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
API 6A Flanges PWHT Requirement
- Thread starter Menon5230
- Start date
Quite clear in API6A that if you are welding flanges to built equipment to API6A then refer to ASME IX, (See 6.3.2.3). There are also other requirements in API6A.
But if you are using the flanges to build a piping to say B31.1 then you need to refer to that code for when PWHT is required.
But if you are using the flanges to build a piping to say B31.1 then you need to refer to that code for when PWHT is required.
- Status
Similar threads
- Locked
- Question