Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

API 650 Annex S S.4.14.2 (c)

C

Cmorse1

Mechanical
Joined
Apr 11, 2025
Messages
2
Can any one explain this to me. Building a tank with a shell thickness of 3/8" and Anchor Chairs are 1/2". Does code csall for PT Final
 
This is the wrong forum for this question. Please delete your post and post in the correct one.
 
I would interpret that wording to mean each part has to be greater than 3/4", not that the sum of the thicknesses is greater than 3/4", so I would say "no".
That could be reworded more clearly.
 
You must log in or register to reply here.

Similar threads

James Yeom
AWS D1.8(2021) Annex F (Normative)Supplemental Ultrasonic Technician Qualification
Replies
0
Views
6K
James Yeom
James Yeom
S
API 653 - Calculate Nozzle Tmin
Replies
1
Views
4K
Louisiana Inspector
Louisiana Inspector
rudiawan .
  • Locked
  • Question Question
inlet nozzle for API 650 tank
Replies
4
Views
771
rudiawan .
rudiawan .
rudiawan .
  • Locked
  • Question Question
rectangular opening for shell at API 650 Tank
Replies
9
Views
2K
LittleInch
LittleInch
rudiawan .
  • Locked
  • Question Question
maximum plate thickness for API 650 tank
Replies
3
Views
423
rudiawan .
rudiawan .

Part and Inventory Search

Sponsor

Back
Top