Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations Ron247 on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

API 610 VERTICAL PUMPS

Status
Not open for further replies.
X01

X01

Mechanical
Mar 31, 2011
1
can anyone advise vertical plane tolerance required relative to horizontal datum, for barrel installation before final grouting?
 
Replies continue below

Recommended for you

Sort by date Sort by votes

For the leveling of the barrel ( suction casing ) of a vertical pump VS6 type, the reference is always made to the horizontal surface of the barrel ( suction casing ) supporting the discharge head. The pump vendor should provide such requirement in their IOM.

 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

S
API 653 - Calculate Nozzle Tmin
Replies
1
Views
4K
Louisiana Inspector
Louisiana Inspector
buzzedge
  • Locked
  • Question
Using oring to maintain small shaft vertical position
Replies
15
Views
7K
TugboatEng
TugboatEng
C
API 650 Annex S S.4.14.2 (c)
Replies
2
Views
4K
JStephen
JStephen
E
  • Locked
  • Question
How to connect horizontal rail & pinion system to a vertical cylindrical cam?
Replies
4
Views
2K
dvd
dvd
trolex
  • Locked
  • Question
Minimum distance between welds API 650 (non-reinforcement nozzle and vertical fillet weld)
Replies
1
Views
1K
JStephen
JStephen

Part and Inventory Search

Sponsor

Back
Top Bottom