Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

API 610 Table 14 Inspection Class II basis

Status
Not open for further replies.
JRotary

JRotary

Mechanical
Joined
Feb 15, 2023
Messages
1
Location
SG
Hi Colleagues,
Good day!

Just would like to check what is the reference Pressure data/value does the “>80% MAWP” is being referenced to require Class II inspection?

Not sure if it is based on the Discharge Pressure or the Rated head/pressure or any other value.

Thank you in advance!


 
Status
Not open for further replies.

Similar threads

LP ENGG
  • Locked
  • Solved
API PLAN
Replies
1
Views
2K
BEMPE16524
BEMPE16524
LP ENGG
  • Locked
  • Question Question
API PLAN
Replies
0
Views
884
LP ENGG
LP ENGG
Mike9208
  • Locked
  • Question Question
API 610 VS4 Mechanical Seal and Seal Plan
Replies
0
Views
553
Mike9208
Mike9208
RogerSAM
  • Locked
  • Question Question
API Plan 72/76 Secondary DGS Failure.
Replies
1
Views
577
SB1976
SB1976
joji90
  • Locked
  • Question Question
API plan 54 instrumentation
Replies
5
Views
895
georgeverghese
georgeverghese

Part and Inventory Search

Sponsor

Back
Top