Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

API 579 s4 pipeline 1

Status
Not open for further replies.
Makun

Makun

Mechanical
Joined
Jul 20, 2009
Messages
57
Location
AR
Hi, I was wondering if is possible to make an API 579 S4 for a whole Pipeline. I've a situation of one Pipeline wich required thickness is 1mm below the average measured. Is possible make this kind of analysis? What another choice do I have?
 
Sort by date Sort by votes
Dear Maku,

Yes you can perform a Fitness For Service for general metal loss by API 579. Other choice is ASME B31G.

Kind regards
Fernando
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Water_Guy
  • Locked
  • Question Question
API 579 - MAT and temperature reduction
Replies
2
Views
1K
Water_Guy
Water_Guy
liamlucas
  • Question Question
api 617 vibration limits
Replies
1
Views
6K
HTURKAK
HTURKAK
A
  • Question Question
API 650 Nozzle on weld joint
Replies
2
Views
12K
Oscarvs
Oscarvs
M
  • Question Question
convert BS EN1998-1 data to API 650
Replies
1
Views
397
HTURKAK
HTURKAK
nabeel3
  • Question Question
API 650_Polygon shape for Bottom plate
Replies
3
Views
3K
Vegas Consulting
Vegas Consulting

Part and Inventory Search

Sponsor

Back
Top