I wonder if anybody out there can offer a definitive answer, I work in the field of combustion and as a supplier we are constantly and correctly asked to design manufacture and supply in accordance with the above specifications, however we are more often than not requested to manufacture our equipment with a plate thickness of 6 mm. This is stipulated within the above codes but only for furnace plate / doors etc. not for burners. Am I missing something?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
API 560 & API 535
- Thread starter NOx
- Start date
Similar threads
- Question
- Question