Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Anyone using CosmosWorks for seismic calculations?

Status
Not open for further replies.
heaterguy

heaterguy

Mechanical
Joined
Nov 15, 2004
Messages
99
Location
US
How difficult is it to use CosmosWorks - dynamics version - to model seismic loading on horizontal and vertical pressure vessels? I have been told that it is a very specialized calculation that requires years and years of experience to perfrom.
 
Status
Not open for further replies.

Similar threads

Joel_Lapointe
  • Locked
  • Question Question
Cylindrical coordinate system shear stresses for SolidWorks Simulation?
Replies
0
Views
1K
Joel_Lapointe
Joel_Lapointe
dlagr21
  • Locked
  • Question Question
How to fixture plate for stepping scenario
Replies
3
Views
1K
FEA way
FEA way
FPPE
  • Locked
  • Question Question
Heat Exchanger: water weight for hydrostatic test FEA
Replies
2
Views
425
FPPE
FPPE
Anurag K
  • Locked
  • Question Question
Remove mass vs direct external force applied?
Replies
1
Views
1K
FEA way
FEA way
mattyjb88
  • Locked
  • Question Question
Plotting Reaction Force Relationship
Replies
1
Views
974
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top