Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

anyone use modbus to do start stop control of multilin 369, did it work ok?

Status
Not open for further replies.
wpm1

wpm1

Chemical
Apr 21, 2006
5
Has anyone use modbus to do start stop control of multilin 369, did it work ok?
 
Replies continue below

Recommended for you

Sort by date Sort by votes
Howdy,
I haven not done this with a 369, but have done it with a 469 (Modbus over Ethernet TCP/IP). Works fine.
It is common to retain a hardwired stop (or ESD) in the starter circuit. This is just in case something goes wrong with your Modbus comm link.
GG

"I have not failed. I've just found 10,000 ways that won't work." Thomas Alva Edison (1847-1931)

 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

TMcRally
  • Question
Back EMF on solenoid control
Replies
19
Views
6K
TMcRally
TMcRally
SA07
  • Locked
  • Question
Use of sacrificial metal to protect 55 MVA transformer 3
Replies
7
Views
405
SA07
SA07
F
  • Locked
use scheme logic in ETAP
Replies
0
Views
2K
Fedato_Italy_Franco
F
Y
  • Question
Trying to figure out cause of malfunction
Replies
7
Views
4K
danw2
danw2
seanleed
  • Locked
  • Question
PFC equipment not registering current use despite working 2
Replies
9
Views
421
seanleed
seanleed

Part and Inventory Search

Sponsor

Back
Top Bottom