Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Anyone Have Experience With MIL-PRF-32014?

Status
Not open for further replies.

WKTaylor

Well-known member
Joined
Sep 24, 2001
Messages
4,305
Location
US
Folks...

Question: does anyone have any real-world use/experience with this lube... beyond it's limited use in cruise missile engine bearings [long-term storage and sudden/violent usage]... and AFRL limited testing?

This is a relatively new grease formulation that shows promise in high-speed/high-wear/high-load moisture laiden climates [due to hydrophobic nature]. It is being considered for use on an USAF aircraft system as a direct replacement for MIL-PRF-81322 and MIL-PRF-23827 in a "certain application" [high stress mechanical, can't say any more].


Regards, Wil Taylor
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top