Any web site about total communication infrastructure ?

[tngv752]

My project invovle into the communication steel structure such as antena, mass tower ect. Need some information about them. THanks.

 

[jjeng2]

Get cut sheets from the antenna manufacturers. They usually have the wind loading on them. There is a seperate design code for this type of stuff. I dont remember what it is called.

 

[JStephen]

I've got a set of bid documents for a tower that references ANSI/EIA/TIA-222-F-1996 and ASTM A-123. Perhaps one or both of those is applicable. (The second one may be the galvanizing standard).

 

[tngv752]

Tower, Monopole, Antenna, Headframe etc.

It seem to me that there is no website about them.

 

[TheTowerMan]

tngv752:
Can you be more specific as to what you need? Are you in the US? If so, most building codes reference (or defer to) the ANSI/TIA/EIA-222-F for Steel Antenna Supporting Structures.

Is your need for broadcast, 2-way, cellular(wireless), WiFi, or other?

Will it involve a stand alone structure, or will it incorporate a structure of another type such as a building, power line, etc?

Will you be involved with the structure or antenna erection? Or design of same?

 

[tngv752]

I m in Australia. Both my supervisors will do the TCI design of Personnal Broadband and medium rise-building.

I am almost involved in concrete and steel structures of building but not in steel antennas etc.