Any recommended training course for an inspection engineer?

[Dawoon]

I work in the refinery plant as an inspection engineer for material and corrosion.

I already knonw that there are some training courses of NACE like "Corrosion control in the Refinery Plant" or "Design for the Corrosion Control."

Are there any more training courses that you recommend for an engineer like me, especially in material and corrosion?

I hear that there are training courser in API, NPRA, and so on.

Please share your information.

Thx.

 

[unclesyd]

II definitely would look at some of these courses from ASM International. they are all quite comprehensive and to the point. I've taken several of the self study type, some with an instructor and some not. I have not taken any of the E type but have heard reports that they are very good.

http://asmcommunity.asminternational.org/portal/site/

http://www/Education/SelfStudy/

http://asmcommunity.asminternational.org/portal/site/

http://www/Education/ELearning/

 

[sw71im]

Hi,

Please check out the link below:

http://www.matthews-training.co.uk/

Hope this helps

 

[rustbuster]

API 571 is a very good course as well.

 

[SJones]

http://www.cswip.com/pdfs/cswip1101.pdf

Steve Jones
Materials & Corrosion Engineer

http://www.linkedin.com/pub/8/83b/b04

 

[stanweld]

API 510/570 courses for certification.