Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
antialiasing
- Thread starter Jeepwidow
- Start date
Theophilus
Mechanical
Yes. You can change the image quality for shaded and wireframe in Tools>Options>Image Quality
This isn't exactly antialiasing, but your screen will only display so well (72 or 96 dpi).
Otherwise, settings for antialiasing are within PhotoWorks for rendering, but I don't think that's what you're looking for.
Jeff Mowry
Industrial Designhaus, LLC
This isn't exactly antialiasing, but your screen will only display so well (72 or 96 dpi).
Otherwise, settings for antialiasing are within PhotoWorks for rendering, but I don't think that's what you're looking for.
Jeff Mowry
Industrial Designhaus, LLC
Theo is right,
Image quality has a direct affect on how clean the model looks but the location of Image quality is a document property. Tools/Options/Document Properties/Image quality Be careful with this though because remember that higher quality uses more resources..
If you wish have your edges shown with anti-Aliasing turned on, you may find that under Tools/Options/System Options/Display Selection and select "Anti-Alias Edges"
Hope that helps,
Regards,
Jon
jgbena@yahoo.com
Image quality has a direct affect on how clean the model looks but the location of Image quality is a document property. Tools/Options/Document Properties/Image quality Be careful with this though because remember that higher quality uses more resources..
If you wish have your edges shown with anti-Aliasing turned on, you may find that under Tools/Options/System Options/Display Selection and select "Anti-Alias Edges"
Hope that helps,
Regards,
Jon
jgbena@yahoo.com
- Status