antialiasing NX7.5

[NikonF6]

I am trying to get antialiazing on my screen:
Preference
visualization
visual

- line antialiazing is checked (but i do not see it happen in sketch or model)
- full scene antialiazing is grayed out. I think it is the one that can make my screen appear with antialiazing in model, sketch and drawing. BUT HOW I MAKE IT WORK.

Or someone knows another way to get antialiazing works.

Thanks

 

[cowski]

full scene antialiazing is grayed out

Check in visualization performance settings to see if it has been disabled there (Preferences -> Visualization performance -> general graphics).

www.nxjournaling.com

 

[Toost]

I think that the full scene anti aliasing is graphics adapter dependent.
What you should look for are lines which are almost horizontal or almost vertical. ( Rotate the view)
See the attached image of a single line with and without anti aliasing.


Regards,
Tomas

 

[NikonF6]

Disable line antializing - is not checked, so it is not disabled
Disable Full Scene Antialiazing - there is a check mark on it, but it is grayed out completely

 

[cowski]

Disable Full Scene Antialiazing - there is a check mark on it, but it is grayed out completely

This indicates that your hardware does not support this feature.

www.nxjournaling.com

 

[NikonF6]

But I have full antializing with Catia 5 on the same computer.
Is NX different on that matter?

 

[cowski]

Are you running an NX certified graphics card & driver?

www.nxjournaling.com

 

[cowski]

Another possibility is the option has been disabled in the customer defaults at the group or site level.

www.nxjournaling.com

 

[NikonF6]

the card is ATI-radeon, and the driver is ATI too. All works but antializing. Not a big deal because the resolution is very fine, just want to explore.

 

[NikonF6]

where in customer default i can find it?

 

[cowski]

File -> utilities -> customer defaults -> gateway -> visualization -> performance.

www.nxjournaling.com

 

[NikonF6]

yes it was disabled here in customer defaults. Check-mark is removed, NX restarted, but all the same. Looks like it is my ATI card.

 

[NikonF6]

reseted computer, NOW WORKS
Thanks Cowski