Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Anti static Design -Ball valve

Status
Not open for further replies.
tsenthil

tsenthil

Mechanical
Joined
Mar 13, 2003
Messages
41
Anti static design in ball valves - More details / write up if any ?.

 
Sort by date Sort by votes
BS5351 states that an anti-static feature is required between stem and body for DN50 or smaller, or between ball, stem and body for larger valves.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

trentar
  • Question Question
example of 12516 valve design calculations
Replies
0
Views
8K
trentar
trentar
E
  • Locked
  • Question Question
12" Ball Valve Repair
Replies
3
Views
3K
johnengkol
johnengkol
Inchtain
  • Question Question
Failure during Hydro Testing of 36" Ball Valve
Replies
12
Views
13K
CptMaaB
CptMaaB
S
  • Locked
  • Question Question
API 6A standard 10000psi ball valve material selection
Replies
4
Views
2K
Sean_Wei
S
trentar
  • Question Question
numerical example of valve design calculations acc to iso en 15761
Replies
0
Views
6K
trentar
trentar

Part and Inventory Search

Sponsor

Back
Top