Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Anti-static additives in unleaded gasoline

Status
Not open for further replies.
eroni67

eroni67

Civil/Environmental
Sep 28, 2011
1
I've read that unleaded gasoline has typically low conductivity. Can someone explain to me why anti-static additives like stadis 450 aren't dosed into unleaded gasoline to raise conductivity levels (like done for kerosene and diesel)?
 
Status
Not open for further replies.

Similar threads

Jone k
  • Locked
  • Question
In Diesel unit what’s the important
Replies
0
Views
690
Jone k
Jone k
Petroquito
  • Locked
  • Question
CDU overhead wash water injection quill plugging 2
Replies
7
Views
5K
0707
0707
balaji28
  • Locked
  • Question
Ash removal from shale oil ( heavy fuel oil + gasoline mixture)
Replies
6
Views
446
georgeverghese
georgeverghese
Lowrentstuff
  • Locked
  • Question
Increasing Raw Natural Gas Dew Point and Molar Flow Rates 2
Replies
10
Views
1K
MortenA
MortenA
Jone k
  • Locked
  • Question
In Hydrocraker unit, two stages and
Replies
2
Views
302
Jone k
Jone k

Part and Inventory Search

Sponsor

Back
Top Bottom