Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Anti-Hydro brand additive cracking problems?

Status
Not open for further replies.

collinsj

Structural
Sep 4, 2001
2
Has anyone had cracking (shrinkage) problems when placing new concrete containing Anti-Hydro brand waterproofing admixture. The manufacturer advertises that the admix should actually reduce shrinkage cracking, but we had the opposite experience. Vertical cracks formed at approximately 4 to 5 feet on center in a wall that was roughly 18 feet high, and 2 feet thick. The concrete was cured under a water spray. Control joints (with water stops) were spaced at 20 feet on center. This project was a tank for a water treatment facility. A section of the tank wall placed later without the admixture had not such cracking.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor