Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ANSYS Workbench very unstable

Status
Not open for further replies.
DrBwts

DrBwts

Mechanical
Joined
Nov 4, 2012
Messages
297
Location
GB
Win 10, x64, ANSYS AIM 17.1

First it was the Meshing module that kept freezing & now its exiting the Geometry module that freezes.

I'm using the simplest geometry imaginable, a square!

Anybody else have similar issues?
 
Sort by date Sort by votes
Sorry to hear about your experience. I barely use AIM, you could try other versions to see if the issue is gone, such as v18.x.

 
Upvote 0 Downvote
Is there another pre-processor for Ansys do you know?
 
Upvote 0 Downvote
Just installed Workbench but that keeps crshing too
 
Upvote 0 Downvote
Turns out I had my monitor plugged into the wrong socket!
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

struclearner
  • Question Question
Modelling Tapped Bolted Joint by Line Body in ANSYS Workbench
Replies
0
Views
4K
struclearner
struclearner
struclearner
  • Locked
  • Question Question
Reaction Force Distribution in ANSYS Workbench!
Replies
0
Views
1K
struclearner
struclearner
H
  • Locked
  • Question Question
how to apply triangular load on an area, in ANSYS Workbench static module
Replies
1
Views
3K
karachun
karachun
O
  • Locked
  • Question Question
ansys civata
Replies
0
Views
2K
oktaeng1
O
S
  • Locked
Concrete Shrinkage modelling with ANSYS
Replies
1
Views
2K
crshears
crshears

Part and Inventory Search

Sponsor

Back
Top