Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
ANSYS Workbench V12 Shell Meshing
- Thread starter kee0419
- Start date
When you use mid-surface and while meshing, select src/trg selection to automatic or manual thin, ANSYS GUI will give you an option between solid and solid shell element. Also try to search about src/trg in ANSYS help for more info. Hope this helps.
- Status
Similar threads
- Question
- Locked
- Question
- Locked
- Question