Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Ansys workbench - thermal contact boundary condition

Status
Not open for further replies.
JoseDRG

JoseDRG

Mechanical
Joined
May 21, 2010
Messages
12
Location
US
Hi,

I'm trying to model a thermal-electric cooler coming in contact with a metal plate with thermal-conductive paste in between them. I'm using ansys workbench 12. can anyone direct me or give me some hints on how to model the boundary conditions?

Thanks.
 
Status
Not open for further replies.

Similar threads

LS_SMS
  • Question Question
Applied Acceleration At Boundary Condition
Replies
2
Views
6K
dgeesaman
dgeesaman
struclearner
  • Question Question
Modelling Tapped Bolted Joint by Line Body in ANSYS Workbench
Replies
0
Views
2K
struclearner
struclearner
struclearner
  • Locked
  • Question Question
Reaction Force Distribution in ANSYS Workbench!
Replies
0
Views
1K
struclearner
struclearner
H
  • Locked
  • Question Question
how to apply triangular load on an area, in ANSYS Workbench static module
Replies
1
Views
3K
karachun
karachun
V
  • Locked
  • Question Question
Boundary conditions and post processing for Planar tension test
Replies
0
Views
614
vsw
V

Part and Inventory Search

Sponsor

Back
Top