Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ANSYS Workbench: shell meshing mid-plane of geometry

Status
Not open for further replies.
pk805

pk805

New member
Joined
Mar 23, 2009
Messages
8
Location
GB
Hi,

I have a STEP file and am looking to extract the mid planes (which are not part of the STEP file) of the solid geometry. is this possible in ANSYS Workbench?

I'd appreciate any responses!
Cheers,

PK
 
Sort by date Sort by votes
Yes, you'll need DesignModeler. There are several tools available to do this (ex. surface from faces, etc.)
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

struclearner
  • Question Question
Modelling Tapped Bolted Joint by Line Body in ANSYS Workbench
Replies
0
Views
2K
struclearner
struclearner
struclearner
  • Locked
  • Question Question
Reaction Force Distribution in ANSYS Workbench!
Replies
0
Views
1K
struclearner
struclearner
H
  • Locked
  • Question Question
how to apply triangular load on an area, in ANSYS Workbench static module
Replies
1
Views
3K
karachun
karachun
O
  • Locked
  • Question Question
ansys civata
Replies
0
Views
2K
oktaeng1
O
T
  • Question Question
Accessing Named Selections of Contact Surfaces via CMSEL After Applying Condensed Geometry Not Possible
Replies
0
Views
5K
TOM1345
T

Part and Inventory Search

Sponsor

Back
Top