Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Ansys Workbench - mesing with specific element type 1

Status
Not open for further replies.
AnTrav

AnTrav

Electrical
Joined
Dec 2, 2011
Messages
3
Location
DE
Hi! I'm having trouble to find, how can an element for meshing be chosen in Ansys Workbench. I am interested in "Solid87" in particular. Is it possible to do it in Workbench? Thank you!
 
Status
Not open for further replies.

Similar threads

YuJie_PV
  • Question Question
1/2 loading for 1/2 model in ansys?
Replies
9
Views
10K
YuJie_PV
YuJie_PV
vanji1
  • Locked
  • Question Question
If I want to construct myself a geometric stiffness matrix induced by a pre constraint with finite element modeling
Replies
0
Views
1K
vanji1
vanji1
T
Thermal load with thermal gradient in a structure analysis with FEM
Replies
1
Views
429
SWComposites
SWComposites
manj1987
  • Locked
  • Question Question
Laptop specs and study material for Ansys workbench
Replies
0
Views
285
manj1987
manj1987
D
  • Locked
Random vibration in ANSYS APDL using results from Linear Perturbation
Replies
1
Views
3K
hacksaw
hacksaw

Part and Inventory Search

Sponsor

Back
Top