Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ANSYS Workbench, line body model, different cross section

Status
Not open for further replies.
JasonNicholson

JasonNicholson

Mechanical
Jun 29, 2006
39
I am trying to run a line body model with different members having different cross sections. Are any of you familar with the Line bodies and how to allow them to have different cross sections?

-Jason Nicholson
 
Status
Not open for further replies.

Similar threads

F
  • Question
How to Integrating the shear stress of the cross sectional area to find the moment M? 1
Replies
9
Views
5K
ThomasH
ThomasH
D
  • Locked
Random vibration in ANSYS APDL using results from Linear Perturbation
Replies
1
Views
3K
hacksaw
hacksaw
netsonicyxf
  • Question
Add supports in the Lusas model
Replies
1
Views
3K
rb1957
rb1957
GregLocock
  • Locked
  • Question
Z88 Aurora - model problem
Replies
3
Views
3K
GregLocock
GregLocock
manj1987
  • Locked
  • Question
Laptop specs and study material for Ansys workbench
Replies
0
Views
201
manj1987
manj1987

Part and Inventory Search

Sponsor

Back
Top Bottom