Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ANSYS Workbench, line body model, different cross section

Status
Not open for further replies.
JasonNicholson

JasonNicholson

Mechanical
Joined
Jun 29, 2006
Messages
39
Location
US
I am trying to run a line body model with different members having different cross sections. Are any of you familar with the Line bodies and how to allow them to have different cross sections?

-Jason Nicholson
 
Status
Not open for further replies.

Similar threads

YuJie_PV
  • Question Question
1/2 loading for 1/2 model in ansys?
Replies
9
Views
10K
YuJie_PV
YuJie_PV
F
  • Locked
  • Question Question
How to Integrating the shear stress of the cross sectional area to find the moment M?
Replies
9
Views
6K
ThomasH
ThomasH
D
  • Locked
Random vibration in ANSYS APDL using results from Linear Perturbation
Replies
1
Views
3K
hacksaw
hacksaw
netsonicyxf
  • Question Question
Add supports in the Lusas model
Replies
1
Views
3K
rb1957
rb1957
GregLocock
  • Locked
  • Question Question
Z88 Aurora - model problem
Replies
3
Views
4K
GregLocock
GregLocock

Part and Inventory Search

Sponsor

Back
Top