Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ANSYS Workbench fail in Solution 1

Status
Not open for further replies.
HaoZ

HaoZ

Structural
Joined
Jul 9, 2012
Messages
8
Location
US
Hi,
I created a structure and try to solve the equivalent stress. It meshes successfully, but fails in solution: An unknown error occurred during solution.

Attached is the solver output. Can anyone help me find the problem? Thanks.
 
Sort by date Sort by votes
maybe because of page file limitation .. try to increase the system page file size ..
 
Upvote 0 Downvote
Thanks bagarbilla.
I notice this problem by reduce the element numbers. I will try to increase the system page file size and check it again.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

struclearner
  • Locked
  • Question Question
Reaction Force Distribution in ANSYS Workbench!
Replies
0
Views
1K
struclearner
struclearner
H
  • Locked
  • Question Question
how to apply triangular load on an area, in ANSYS Workbench static module
Replies
1
Views
3K
karachun
karachun
O
  • Locked
  • Question Question
ansys civata
Replies
0
Views
2K
oktaeng1
O
X
  • Locked
  • Question Question
ANSYS mechanical : How to read the dimensions which are defined as function of other dimensions in UGNX as parameters in ANSYS?
Replies
0
Views
1K
xinyu3liu
X
S
  • Locked
Concrete Shrinkage modelling with ANSYS
Replies
1
Views
2K
crshears
crshears

Part and Inventory Search

Sponsor

Back
Top