Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ANSYS magnetostatics - how to model permanent magnets

Status
Not open for further replies.
needmagnethelp

needmagnethelp

Mechanical
Joined
May 15, 2010
Messages
1
Location
US
I'm trying to find the force between two permanent magnets using ANSYS. I have imported the geometry of the magnets from SolidWorks, and now want to set the magnetic properties of the two magnets, and solve for the force between them. I have never used the magnetostatics part of ANSYS before.

Does anyone know of any good websites/tutorials/textbooks that I can use to find a step-by-step guide to finding the force between two permanent magnets using ANSYS?

Thanks in advance for your help!
 
Status
Not open for further replies.

Similar threads

M
  • Locked
  • Question Question
ANSYS Mechanical Scripting: how to delete an existing heatflux?
Replies
0
Views
841
MihailW
M
X
  • Locked
  • Question Question
ANSYS mechanical : How to read the dimensions which are defined as function of other dimensions in UGNX as parameters in ANSYS?
Replies
0
Views
1K
xinyu3liu
X
O
  • Locked
  • Question Question
ansys civata
Replies
0
Views
2K
oktaeng1
O
struclearner
  • Question Question
Modelling Tapped Bolted Joint by Line Body in ANSYS Workbench
Replies
0
Views
557
struclearner
struclearner
H
  • Locked
  • Question Question
how to apply triangular load on an area, in ANSYS Workbench static module
Replies
1
Views
3K
karachun
karachun

Part and Inventory Search

Sponsor

Back
Top