Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ANSYS file structural analysis ERROR

Status
Not open for further replies.
snkadati

snkadati

Aerospace
Joined
May 29, 2012
Messages
6
"The value of UY at node 279 (the node changes depending on where I put forces and constraints) i2 2.849378589E+11. It is greater than the current limit of 1000000. This generally indicates rigid body motion as a result of an unconstrained model. Verify that your model is properly constrained."

any help me?

i attached the file bellow
 
Status
Not open for further replies.

Similar threads

civilsub911
  • Locked
Seismic analysis using Tekla Structural Designer
Replies
0
Views
1K
civilsub911
civilsub911
D
  • Locked
  • Question Question
structural
Replies
1
Views
1K
ChorasDen
ChorasDen
VSS Engineering
  • Question Question
PE Civil Structural Exam
Replies
5
Views
7K
HDStructural
HDStructural
sjay123
  • Locked
  • Question Question
Boom Structural Analysis and Design
Replies
5
Views
729
ChorasDen
ChorasDen
S
  • Question Question
How to Allow Steel Balls to Move in a Container (Particle Damper) – ANSYS Workbench Transient Analysis
Replies
0
Views
3K
Sandra_N
S

Part and Inventory Search

Sponsor

Back
Top