Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Ansys - Contact Status - please help

Status
Not open for further replies.
Grobla

Grobla

Mechanical
Joined
Dec 16, 2014
Messages
2
Location
PL
Hi Guys,

I am working - modeling on 2d, cooperatin o-ring seal with ram in Ansys.
On contact status I can see information where is sticking,sliding,near etc. status.
However I need detailed information about contact: - width of contact.
I can not find any tutorials, information where I can find required information.
I will be grateful for the help.
 
Sort by date Sort by votes
Are you working in Ansys Mechanical or Ansys Mechanical APDL?
 
Upvote 0 Downvote
I am working in Ansys Mechanical
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

O
  • Locked
  • Question Question
ansys civata
Replies
0
Views
2K
oktaeng1
O
S
  • Locked
Concrete Shrinkage modelling with ANSYS
Replies
1
Views
2K
crshears
crshears
somebodyfromworld
  • Locked
  • Question Question
ACT extensions for Ansys
Replies
0
Views
1K
somebodyfromworld
somebodyfromworld
M
  • Question Question
spaceclaim to STEP format, Help needed.
Replies
2
Views
20K
mosenansi
M
X
  • Locked
  • Question Question
ANSYS mechanical : How to read the dimensions which are defined as function of other dimensions in UGNX as parameters in ANSYS?
Replies
0
Views
1K
xinyu3liu
X

Part and Inventory Search

Sponsor

Back
Top