Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Ansys contact area

Status
Not open for further replies.
MarceloM

MarceloM

Mechanical
Joined
Sep 10, 2018
Messages
53
Location
PT
Hello,

How can i see the results for the contact area between two bodies?

Thank you.
 
Sort by date Sort by votes
Add Contact Tool to results. It will visualize for example contact status, contact pressure.
 
Upvote 0 Downvote
Yes i know that, but how can i see the contact area between 2 components (exemple:
contact between plantar fascia and rigid block =100cm2).

Thank you for the reply.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

O
  • Locked
  • Question Question
ansys civata
Replies
0
Views
2K
oktaeng1
O
H
  • Locked
  • Question Question
how to apply triangular load on an area, in ANSYS Workbench static module
Replies
1
Views
3K
karachun
karachun
S
  • Locked
Concrete Shrinkage modelling with ANSYS
Replies
1
Views
2K
crshears
crshears
somebodyfromworld
  • Locked
  • Question Question
ACT extensions for Ansys
Replies
0
Views
1K
somebodyfromworld
somebodyfromworld
X
  • Locked
  • Question Question
ANSYS mechanical : How to read the dimensions which are defined as function of other dimensions in UGNX as parameters in ANSYS?
Replies
0
Views
1K
xinyu3liu
X

Part and Inventory Search

Sponsor

Back
Top