Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Ansys ACP Pre Bad Mesh Problem

Status
Not open for further replies.
HS93

HS93

Mechanical
Joined
Feb 13, 2017
Messages
3
Location
GB
Hi,

I'm newish to Ansys ACP Pre.
I've created a composite layup on my tidal turbine blade, but when I go into mechanical I notice that the plies on the inside have created large gaps in the mesh.
I'm unsure what I've done wrong, and I need some help to amend this.
I've attached an imagine of the inside of the blade.
Ansys_ACP_mesh_error_w0ot0b.png


Many thanks,
Harry
 
Sort by date Sort by votes
Please attach a picture of the geometry before meshing.
 
Upvote 0 Downvote
Hi, Thanks for the reply. Here's some screenshots of the blade.

Blade_Cut_ptymyd.png


Blade_Y_qcptpd.png


Blade_Z_wfhcnf.png
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

A
generating mesh
Replies
2
Views
7K
Ahmad_f88
A
O
  • Locked
  • Question Question
ansys civata
Replies
0
Views
2K
oktaeng1
O
S
  • Locked
Concrete Shrinkage modelling with ANSYS
Replies
1
Views
2K
crshears
crshears
somebodyfromworld
  • Locked
  • Question Question
ACT extensions for Ansys
Replies
0
Views
1K
somebodyfromworld
somebodyfromworld
X
  • Locked
  • Question Question
ANSYS mechanical : How to read the dimensions which are defined as function of other dimensions in UGNX as parameters in ANSYS?
Replies
0
Views
1K
xinyu3liu
X

Part and Inventory Search

Sponsor

Back
Top