Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ansys 7.0

Status
Not open for further replies.
palex

palex

Mechanical
Joined
Nov 1, 2002
Messages
12
Location
CA
Does anyone has actually seen the new ansys release?? It is supposed to be as easy as designspace to use, but with all the power of ansys professionel.I would like to have that confirm by someone who isn't an ansys dealer.

thanks
 
Sort by date Sort by votes
I have not touched it yet.
According to the annuncement, v7.0 seems improved interface between ansys and cads.
Does anyone knows if ansys acquired cadfix? Sounds like they add cadfix into v7.0.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

O
  • Locked
  • Question Question
ansys civata
Replies
0
Views
2K
oktaeng1
O
S
  • Locked
Concrete Shrinkage modelling with ANSYS
Replies
1
Views
2K
crshears
crshears
somebodyfromworld
  • Locked
  • Question Question
ACT extensions for Ansys
Replies
0
Views
1K
somebodyfromworld
somebodyfromworld
X
  • Locked
  • Question Question
ANSYS mechanical : How to read the dimensions which are defined as function of other dimensions in UGNX as parameters in ANSYS?
Replies
0
Views
1K
xinyu3liu
X
M
  • Locked
  • Question Question
ANSYS Mechanical Scripting: how to delete an existing heatflux?
Replies
0
Views
812
MihailW
M

Part and Inventory Search

Sponsor

Back
Top