Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ANSYS 16.1 Workbench Mechanical Legend Display

Status
Not open for further replies.
dobbertz

dobbertz

Mechanical
Joined
Jul 8, 2015
Messages
3
Location
CA
Hey all,

So I'm pretty new to using ANSYS, and I'm getting the hang of it pretty well so far! I'm hoping this question has a fairly simple answer that I just can't find.

I'm pulling screenshots from my results to put into a report, and my boss requested that I increase the font size of the legend to make it easier to see.

This is what I'm looking at right now:
VonMisesStress_Case_1_View_1_eeafas.jpg


Any help is greatly appreciated.

Thanks!!
 
Status
Not open for further replies.

Similar threads

M
  • Locked
  • Question Question
ANSYS Mechanical Scripting: how to delete an existing heatflux?
Replies
0
Views
834
MihailW
M
TeoAlfa
  • Locked
  • Question Question
ANSYS Mechanical - Concrete embedded steel components
Replies
0
Views
745
TeoAlfa
TeoAlfa
struclearner
  • Locked
  • Question Question
Reaction Force Distribution in ANSYS Workbench!
Replies
0
Views
1K
struclearner
struclearner
H
  • Locked
  • Question Question
how to apply triangular load on an area, in ANSYS Workbench static module
Replies
1
Views
3K
karachun
karachun
X
  • Locked
  • Question Question
ANSYS mechanical : How to read the dimensions which are defined as function of other dimensions in UGNX as parameters in ANSYS?
Replies
0
Views
1K
xinyu3liu
X

Part and Inventory Search

Sponsor

Back
Top