Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ANSI/IEEE STD 100

Status
Not open for further replies.
MrSpock

MrSpock

Electrical
Joined
May 24, 2001
Messages
25
Location
US
I need a copy of ANSI/IEEE STD 100 Standard Dictionary of Electrical and Electronic Terms........ I have quite a few Electromagnetic Standards and would be happy to share......Thanks MrSpock
 
Status
Not open for further replies.

Similar threads

ShlomoB
  • Locked
  • Question Question
Adding the same balloon multiple times in a drawing (ANSI)
Replies
3
Views
3K
ewh
ewh
Tmoose
  • Locked
  • Question Question
ANSI Standard tolerances - B4.1 - but not just cylindrical fits
Replies
0
Views
985
Tmoose
Tmoose
Mauro Nicoli
  • Locked
  • Question Question
ANSI 16.5
Replies
6
Views
1K
Mauro Nicoli
Mauro Nicoli
Quality Improvement 1
  • Locked
  • Question Question
ANSI Standard requiring changing part number vs revision
Replies
3
Views
1K
looslib
looslib
apolq
  • Locked
  • Question Question
DIN vs ANSI (mating flanges)
Replies
1
Views
957
mk3223
mk3223

Part and Inventory Search

Sponsor

Back
Top