ANSI Flange Ratings 3

[ggordonstewart]

Does anyone know where I can find ANSI 16.5 Pressure/Temperature Ratings for Flanges Class 150, 300, 600 & 900 on the internet? G. Gordon Stewart, P.Eng.
Gas & Oil Process Engineering Consultant

http://www.ggordonstewart.com/

ggstewar@telusplanet.net

 

[LSThill]

Hi ggordonstewart (Chemical)

Yes:

http://www.red-bag.com/serv_engtools.html

Flange dimensions
To review the dimensions and weights of frequently used ANSI WN and LWN flanges, and some DIN flanges as well Continue >

Leonard@thill.biz

http://www.thill.biz

 

[ggordonstewart]

This site gives flange dimensions, but not pressure ratings at various temperatures. G. Gordon Stewart, P.Eng.
Gas & Oil Process Engineering Consultant

http://www.ggordonstewart.com/

ggstewar@telusplanet.net

 

[grandnobi]

ggordonsteward,

The data shown on this page seems to be consistent with ANSI B16.5.

http://www.mychromalox.com/technical/pdf/en/flange-pipe.pdf

 

[ggordonstewart]

Thank you. That was exactly what I was looking for. G. Gordon Stewart, P.Eng.
Gas & Oil Process Engineering Consultant

http://www.ggordonstewart.com/

ggstewar@telusplanet.net

 

[DSB123]

Just a point of clarification. The Standard is ASME B16.5 and not ANSI B16.5. It changed some years ago.

 

[JAlton]

http://www.scsenergy.com/scsdataflgrating.htm

J. Alton Cox
President
DeLuca Test Equipment

http://www.delucatest,com