Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ANSI Class 6 Seats

Status
Not open for further replies.
bourne03

bourne03

Mechanical
Joined
Apr 3, 2003
Messages
6
Location
MY
Hi,

When I was reading, I came across this ANSI Class 6 Seats
in valve section. May I know what is the specification it
refers to ?

Hope to know.

Bourne
 
Sort by date Sort by votes
good day,
valves which are under high prssuer need more than one seat for insuring enough stability to the spindle.
i hope this information will be enough.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

ShlomoB
  • Locked
  • Question Question
Adding the same balloon multiple times in a drawing (ANSI)
Replies
3
Views
3K
ewh
ewh
Tmoose
  • Locked
  • Question Question
ANSI Standard tolerances - B4.1 - but not just cylindrical fits
Replies
0
Views
993
Tmoose
Tmoose
Mauro Nicoli
  • Locked
  • Question Question
ANSI 16.5
Replies
6
Views
1K
Mauro Nicoli
Mauro Nicoli
Quality Improvement 1
  • Locked
  • Question Question
ANSI Standard requiring changing part number vs revision
Replies
3
Views
1K
looslib
looslib
changedsoul
  • Locked
  • Question Question
USAS Y14.5-66 MMC Implied????
Replies
7
Views
1K
looslib
looslib

Part and Inventory Search

Sponsor

Back
Top