Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ANSI B56.1 Certification

Status
Not open for further replies.
sharx24

sharx24

Mechanical
Joined
Sep 16, 2015
Messages
1
Location
CA
What is the process and the requirement to have a product certified B56.1 or to have it "comply with ANSI B56.1"?

We only manufacture forks and attachment, not the entire truck. Do we only need to test our product to meet B56.1? Do we need external approuval from a certifed lab? From ANSI?

Same question for ISO 2330...

Thank you!
 
Status
Not open for further replies.

Similar threads

ShlomoB
  • Locked
  • Question Question
Adding the same balloon multiple times in a drawing (ANSI)
Replies
3
Views
3K
ewh
ewh
Tmoose
  • Locked
  • Question Question
ANSI Standard tolerances - B4.1 - but not just cylindrical fits
Replies
0
Views
983
Tmoose
Tmoose
Mauro Nicoli
  • Locked
  • Question Question
ANSI 16.5
Replies
6
Views
1K
Mauro Nicoli
Mauro Nicoli
Quality Improvement 1
  • Locked
  • Question Question
ANSI Standard requiring changing part number vs revision
Replies
3
Views
1K
looslib
looslib
apolq
  • Locked
  • Question Question
DIN vs ANSI (mating flanges)
Replies
1
Views
957
mk3223
mk3223

Part and Inventory Search

Sponsor

Back
Top