Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
ANSI B31.1-1967 EDITION
- Thread starter samuelliu
- Start date
Samuelliu:
According to Navco's piping datalog 1966 edition the formula for minimum thickness is:
Per ASA piping code B31.1 (This is now ASME B31.1)
Tm = PDo / 2(SE+ Py) + A (A is added thickness)
This is the same formula which is in ASME B31.1 now.
According to Navco's piping datalog 1966 edition the formula for minimum thickness is:
Per ASA piping code B31.1 (This is now ASME B31.1)
Tm = PDo / 2(SE+ Py) + A (A is added thickness)
This is the same formula which is in ASME B31.1 now.
- Status
Similar threads
- Question
- Locked
- Question
- Locked
- News
- Locked
- Question