Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ANSI B2.1-1996 spline question

Status
Not open for further replies.
spigor

spigor

Mechanical
Joined
Aug 4, 2006
Messages
269
Location
PL
Hi,

would anybody be so kind to check the following spline root diameter w/tolerance for me?

ANSI B2.1-1996
splines with 30 deg. pressure angle, flat root and side fit
Pitch: 8/16
Number of teeth: 13
External

Thank you in advance.

 
Sort by date Sort by votes
ANSIB9218-16Z13.jpg
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

B
  • Locked
  • Question Question
Involute Rack and Sector Pinion Gear Question
Replies
5
Views
2K
mfgenggear
mfgenggear
BD5_MxExp
  • Locked
  • Question Question
Spline Data: DIN 3960 Inspection Information
Replies
2
Views
668
mfgenggear
mfgenggear
BD5_MxExp
  • Locked
  • Question Question
Gear Data: Spline Date DIN 5480 - HELP
Replies
6
Views
1K
spigor
spigor
Hidk
  • Locked
  • Question Question
ROUNDNESS (0.100mm) gauge for external major spline
Replies
5
Views
529
mfgenggear
mfgenggear
D_Unter
  • Locked
  • Question Question
Identifying a JIS spline - Yamaha R6
Replies
6
Views
1K
D_Unter
D_Unter

Part and Inventory Search

Sponsor

Back
Top