ANSI 14 TOOTH 12/24 B92.1 SPLINE SHAFT

[alanled]

IM TRYING TO LOCATE A SPLINE SHAFT DETAILED DRAWING IN ANY FORMAT OF A ANSI 14 TOOTH 12/24 B92.1 SPLINE SHAFT. COULD ANYONE HELP ME WITH THIS PLEASE. MANY THANKS.

 

[kellnerp]

Why not use Machineries Handbook? Splines are not that hard to draw.

http://www.engtran.com

http://www.niswug.org

 

[Heckler]

Both Machineries HDBK and ANSI B92.1 will give you all the data you need to call out a Spline. Sometimes I model splines if time permits and the rest of the times I just call the data out in a table. Again, both specs will give you the information you need.

Best Regards,

Heckler
Sr. Mechanical Engineer
SW2005 SP 5.0 & Pro/E 2001
Dell Precision 370
P4 3.6 GHz, 1GB RAM
XP Pro SP2.0
NVIDIA Quadro FX 1400
o
_`\(,_
(_)/ (_)