Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Annoying lines at corners Workbench

Status
Not open for further replies.
AlexanderDewar

AlexanderDewar

Mechanical
Joined
Apr 20, 2012
Messages
5
Location
GB
Hi,

As you can see in the image, these annoying triad line things have appeared. Does anyone know what they are and how I turn them off?

Cheers
Alexander
 
Status
Not open for further replies.

Similar threads

struclearner
  • Question Question
Modelling Tapped Bolted Joint by Line Body in ANSYS Workbench
Replies
0
Views
4K
struclearner
struclearner
LS_SMS
  • Question Question
Applied Acceleration At Boundary Condition
Replies
2
Views
6K
dgeesaman
dgeesaman
struclearner
  • Locked
  • Question Question
Reaction Force Distribution in ANSYS Workbench!
Replies
0
Views
1K
struclearner
struclearner
H
  • Locked
  • Question Question
how to apply triangular load on an area, in ANSYS Workbench static module
Replies
1
Views
3K
karachun
karachun
IJR
  • Locked
  • Question Question
On how and where to insert command snippets inside Workbench mechanical
Replies
2
Views
2K
IJR
IJR

Part and Inventory Search

Sponsor

Back
Top