Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Anneal temperature for AISI 1215
- Thread starter brazeit
- Start date
I recommend annealing in vacuum or dry hydrogen atmosphere at 1650degF for 1 hour minimum (add more time if your material is thick).
This will optimize the magnetic properties for the material. I can't give you the exact properties because that will vary from batch to batch.
For more assistance, a description of your application will help.
This will optimize the magnetic properties for the material. I can't give you the exact properties because that will vary from batch to batch.
For more assistance, a description of your application will help.
- Status
