Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Anchor trench design for lysimeter

Status
Not open for further replies.
mbsmith

mbsmith

Civil/Environmental
Joined
Feb 6, 2002
Messages
7
Location
US
I am confronted with regulators who doubt my assertion that anchor trenches are not needed to provide slope stability for an HDPE-lined lysimeter pan. They want to see a reference where HDPE liner has been used without an anchor trench - any suggestions?
 
Status
Not open for further replies.

Similar threads

S
  • Locked
  • Question Question
Need assistance with a RS2 Slope design - Blasted Pyroxenite being dumped down a slope
Replies
0
Views
910
Shawn van Wyk
S
Y
  • Locked
  • Question Question
Head wall height determination for Gravity retaining wall
Replies
4
Views
3K
HTURKAK
HTURKAK
JahmaiS_
  • Locked
  • Question Question
Slope Stability and retaining wall design
Replies
0
Views
1K
JahmaiS_
JahmaiS_
LOTE
  • Locked
  • Question Question
Global FOS 1.3 vs 1.5 for Retaining Walls
Replies
15
Views
3K
geotechguy1
geotechguy1
pelelo
  • Locked
  • Question Question
c and phi values for rocks
Replies
3
Views
1K
EireChch
EireChch

Part and Inventory Search

Sponsor

Back
Top