PST09
Civil/Environmental
- Jan 21, 2009
- 46
Im unsure this thread is in the correct place, so apologies if its not.
We shall be designing the thrust restraint (DeadMan) for a Horizontal Directional Drill (350Ton Rig). I have limited information regarding the forces involved and was looking to see if there was anyone that could offer some design guidance or assistance any input would be much appreciated.
From drawings it seems the block has RSJs incorperated into the it for the rig to fix to.
The maximum pull back force of the rig is 300Ton
Many Thanks for any guidance you can offer,
We shall be designing the thrust restraint (DeadMan) for a Horizontal Directional Drill (350Ton Rig). I have limited information regarding the forces involved and was looking to see if there was anyone that could offer some design guidance or assistance any input would be much appreciated.
From drawings it seems the block has RSJs incorperated into the it for the rig to fix to.
The maximum pull back force of the rig is 300Ton
Many Thanks for any guidance you can offer,
