I did analysis of a pre-stressed wind turbine tower.I run the model for different strength of concrete, the change in the graph of bending moment vs and deflection was the slope of curve during the linear phase. and in the next case i kept the vertical axial force and the result was same with the vertical force in other 3 cases. the structure failed by compression at the front portion at about 2/3 height from the bottom.however, I could not achieve the horizontal line in BM vs deflection curve during the model like that of the experiment.the reinforced steel in compression region went under plastic phase
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
analysis of prestressed concrete wind-turbine tower
- Thread starter forf
- Start date
- Status
Similar threads
- Question
- Question