Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

An Inventor Bible?

Status
Not open for further replies.

TVP45

Mechanical
Joined
Jul 26, 2006
Messages
8
Location
US
Is there anything for Inventor roughly equivalent to Matt Lombard's SolidWorks Bible?
 
Nothing quite that size but you might want to try these:


I have only read the 2010 version of the above but is should be similar. Also my recommended over the one below.


There are also numerous tutorials and white papers around for free if you do a search.
 
Thank you. I'll follow up.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top