Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Amplitudes in shells 1

Status
Not open for further replies.
Pinto98

Pinto98

Civil/Environmental
Joined
Apr 4, 2008
Messages
6
Location
DE
Dear all,

Is there a possibility to use different amplitudes for the different shell section points, e.g. for applying different temperatures to the section points?

Many thanks in advance!

Pinto
 
Sort by date Sort by votes
yes,

you have to use composite section in shell, divide the shell thickness (say 100mm) into parts (say 5 parts), hence u will have 5 x 20mm thick of shell, u could apply amplitude to the shell with different temperature.

mambo5
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

g.alshamsi
  • Locked
  • Question Question
Principal Stresses in Shells (S4R) - Section Points
Replies
2
Views
451
g.alshamsi
g.alshamsi
I
  • Question Question
Wear in abaqus
Replies
8
Views
15K
Rama27
R
M
  • Question Question
Excessive Distortion in Press Hardening Simulation
Replies
1
Views
7K
FEA way
FEA way
swahlgren
  • Locked
  • Question Question
Bug in explicit.
Replies
3
Views
3K
FEA way
FEA way
A
  • Solved
Applying Local Coordinate System for BC in Abaqus
Replies
1
Views
4K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top