Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ammonia in saturation steam

Status
Not open for further replies.

visitor

New member
Joined
Mar 28, 2002
Messages
117
Location
US
Whether Increased ammonia i.e beyond 1-2ppm in saturation steam for two or three days continuously can cause tube failures in platen SH.Please eloborate other effects too.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top