AO1958
Industrial
- Mar 13, 2009
- 73
Hi there,
hope everything is fine.
Please, I would be grateful if somebody could help me in following topic.
I have red following topic
thread338-273391
but I am afraid it doesn't answer completely my question.
Following is the topic:
Ammonia is not corrosive for stainless steel without presence of water or condensate.
From the same topic I can quote
<<Unless you are at extreme temperature, pressures, and concentrations; any SS will have a near zero corrosion rate>>
(mr. EdStainless )
Should water be present with the ammonia, are there risks of corrosion ?
The presence of water be even in form of water condensate.
the stainless steel I would be interested is AISI 304 or AISI 316
Thanks for your help.
hope everything is fine.
Please, I would be grateful if somebody could help me in following topic.
I have red following topic
thread338-273391
but I am afraid it doesn't answer completely my question.
Following is the topic:
Ammonia is not corrosive for stainless steel without presence of water or condensate.
From the same topic I can quote
<<Unless you are at extreme temperature, pressures, and concentrations; any SS will have a near zero corrosion rate>>
(mr. EdStainless )
Should water be present with the ammonia, are there risks of corrosion ?
The presence of water be even in form of water condensate.
the stainless steel I would be interested is AISI 304 or AISI 316
Thanks for your help.