Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Amine Injection

Status
Not open for further replies.
lcmechengr

lcmechengr

Mechanical
Joined
Apr 27, 2006
Messages
28
Location
US
I have a situation where Boiler Feed Water has amine injected for pH control. Is there an amine concentration vs. temperature relationship where I will need to worry about SCC or general corrosion in carbon steel? Thanks for any advise.
 
Status
Not open for further replies.

Similar threads

rscosta1976
  • Locked
  • Question Question
CDU neutralizer amine injection
Replies
4
Views
602
0707
0707
tknight99
  • Locked
  • Question Question
Sodium Bisulfite Injection in Carbon Steel Line
Replies
7
Views
744
bimr
bimr
YuJie_PV
  • Locked
  • Question Question
High temperature Ammonia corrosion and MOC of AIG (Ammonia Injection Grid)
Replies
16
Views
1K
YuJie_PV
YuJie_PV
Chumpes
  • Locked
  • Question Question
NACE SP0472 Amine Service PWHT holding time and temperature
Replies
8
Views
1K
Chumpes
Chumpes
DieguitoI
  • Locked
  • Question Question
Minimum H2S loading in lean amine systems
Replies
1
Views
296
Dhurjati Sen
Dhurjati Sen

Part and Inventory Search

Sponsor

Back
Top